The power law-creep behavior of superplastic
Sn–40Pb–2.5Sb alloys with different grain sizes has
been investigated at room temperature. Stress exponent
values for these alloys have been determined by
indentation ...

Creep behavior of the cast the Pb–1.25%Sb and Pb–4.5%Sb alloys was studied by impression testing. The tests were carried out under constant

stress in the range of 40–135MPa and at temperatures in the range of 300–420 ...

Creep behavior of Sn–40%Pb–2.5%Sb peritectic solder alloy having two different grain sizes was studied by indentation, impression, stress

relaxation and conventional creep tests at room temperature (T > 0.65 Tm) ...

Creep behaviour of the Sn–40% Pb–2.5% Sb peritectic alloy having different grain sizes was studied by long time Vickers indentation

testing at room temperature. Based on the steady-state power law creep relationship, ...

in this study,Al-B4c nano structured powder was syntensized by high energy ball milling.the micro structure of the powders has been determined using TEM and their size distributionhas been determined using particle size ...

The power law creep behaviour of the Sn–40Pb–2?5Sb peritectic solder alloy was investigated

using an impression test apparatus. The tests were carried out under constant stress in the range

17 to 39 MPa and ...

Mechanical behavior of AA1100 aluminum alloy processed by multiple compressions in a channel die

was modeled on the basis of a generalized three-dimensional dislocation-density-based two-phase composite

model. ...

Based on the analysis proposed by Jones and Gillis (JG), forming limit diagrams (FLDs) are calculated

from idealization of sheet deformation into three stages: (I) homogeneous deformation up to maximum

load, ...