process by a

visible light source was investigated. The factors that influence the

dye removal efficiency, such as initial pH value, temperature, hydrogen

peroxide concentration, and RB5 concentration were examined...

Porous membranes were prepared by non-solvent induced phase inversion from miscible blends of

polyvinylchloride and thermoplastic polyurethane. Pure water flux measurement showed that addition

of TPU to PVC ...

, and Fe/Ni dosage on dye removal process was investigated. The results showed that 60 mg of Fe/Ni NPs at 25 °C and pH = 1 can remove 99.5% of 50 mg l b -1 dye solution within 15 min. The MO removal follows the pseudo-second-order kinetics with the rate...

removal, adsorption is widely used for water purification. Adsorption is superior to other

techniques due to its initial cost, flexibility, simplicity of design, and ease of operation [3].

Among different adsorbents which were applied for azo dye removal...

including adsorbent dosage, pH, temperature, dye concentration, and ionic strength on the dye removal efficiency was studied. The experimental data were fitted well with the pseudo-secondorder kinetic model (R2 = 0.997). The activation energy of 25.80 kJ mol...

Fe/Pd nanoparticles were used to degrade an azo dye, Reactive Black 5 (RB5) in aqueous solution. Fe/Pd

nanoparticles were prepared by a simple successive reduction method. Transmission electron microscopy

verified ...