Search
CSV
RISORC-based power generation from low-grade heat sources
This paper presents the results of an experimental investigation of power generation from low-grade heat sources based on an organic Rankine cycle (ORC). Iso pentane was used as the ORC working fluid in this study. The heated water with natural gas...
Estimation of the strenght of the time-dependent heat source using temperature distribution at a point in a three layer system
In this paper, the conjugate gradient method coupled with adjoint problem is used in order to solve the inverse heat conduction problem and estimation of the strength of the time- dependent heat source using the temperature distribution at a point...
Entropy generation analysis of nanofluid flow over a spherical heat source inside a channel with sudden expansion and contraction
The present paper deals with entropy generation study of CuO/water nanofluid flow over a spherical heat source that is installed inside a cylindrical channel with sudden expansion and contraction. To estimate the entropy generation rate; first...
ESTIMATION OF THE STRENGTH OF THE TIME-DEPENDENT HEAT SOURCE USING TEMPERATURE DISTRIBUTION AT A POINT
In this paper, the conjugate gradient method coupled with adjoint problem is used in order to solve the inverse heat conduction problem and estimation of the strength of the time- dependent heat source using the temperature distribution at a point...
Estimating the heat source and the heat transfer coefficient simultaneously in a living tissue by conjugate gradient method
Abstract— In this study, inverse methodology is applied to
estimate the controllable parameters in hyperthermia such as the
external heat source and the heat transfer coefficient at the skin
surface. The direct problem...
Three Dimensional Investigation of the Shock Train Structure in a Convergent-Divergent Nozzle
Three dimensional computational fluid dynamics analyses have been employed to study the
compressible and turbulent flow of the shock train in a convergent-divergent nozzle. The primary goal
is to determine ...
Simultaneous estimation of controllable parameters in a living tissue during thermal therapy
During hyperthermia, controlling the temperature distribution along the tissue can cause remedial
advantages.This can be obtained by proper manipulation of effective parameters in hyperthermia such
as the external heat source...
Source term prediction in a multilayer tissue during hyperthermia
One of the major challenges in the use of hyperthermia to treat cancer is determining the desired heating power of external source in such away that the thermal injury is confined to the unhealthy tissue. In this
study,an ...
Performance Study of a Supersonic Inlet in the Presence of a Heat Source
of the inlet and were used as a baseline and validation tools for the
numerical code. A heat source was added to the flow field at a distance ahead of the inlet. The effect of
heat source addition on the main performance parameters of the inlet...