Search

Now showing items 1-10 of 17

Estimation of Deformation Length in Cold Roll Forming Considering the Effect of Work Hardening

Type: Conference Paper

Author : M., Noghabi; A., Assempour

Request PDF

نقش متغیرهای فرآیند تبلور مجدد در رفتار ناهمسانگردی ورق فولاد نورد شده St 52Role of Recrystallization Parameters on the Anisotropy Behavior of rolled Sheet Steel St 52-

Type: Journal Paper

Author : سیدعبدالکریم سجادی; سیدمجتبی زبرجد; Seyed Abdolkarim Sajjadi; Seyed Mojtaba Zebarjad

Year: 2007

Abstract:

Cold rolling which is one of the most important technique in sheet steel forming causes stretching of microstructure and thus directionality of mechanical properties. This kind of directionality of mechanical properties is known as anisotropy which...

QUANTITIVE XRD AND EDDY CURRENT INVESTIGATION OF ROLLED AISI 304L AUSTENITIC STAINLESS STEEL

Type: Conference Paper

Author : روح اله سورکی علی آباد; محمد مزینانی; محسن حدادسبزوار; حسین قاسمی طبسی; یگانه کلیدری; Roohallah Surkialiabad; Mohammad Mazinani; Mohsen Haddad Sabzevar; Hossein Ghasemi Tabasi; Yeganeh Kelidari

Year: 2012

Abstract:

By measuring the volume fraction of martensite destruction of the samples or in some cases the

amount of it would be considered. In this work, a 304L AISI austenitic stainless steel was rolled from

10 to 80% ...

Non-linear permutation groups on Physarum polycephalum

Type: Conference Paper

Author : Schumann, Andrew

Publisher: IEEE

Year: 2014

Antiferromagnetism and Low Magnetostriction in <inline-formula> <img src="/images/tex/21713.gif" alt="{\\rm Fe}_{100-{\\rm x}}{\\rm Mn}_{\\rm x}"> </inline-formula> (<inline-formula> <img src="/images/tex/21714.gif" alt="{\\rm x}={38}"> </inline-formula>, 42, 46, 50, and 55) Alloys

Type: Journal Paper

Author : Sato-Turtelli, Reiko; Bormio-Nunes, Cristina; Tiguman, K.T.; Geist, David; Panigrahi, A.; Grijalva, Cristina; Sorta, Stephan; Grossinger, Roland; Zehetbauer, Michael

Publisher: IEEE

Year: 2014

Design of a 180° directional coupler with arbitrary branch lengths

Type: Conference Paper

Author : Arigong, B.; Jin Shao; Mi Zhou; Jun Ding; Han Ren; Hyoungsoo Kim; Hualiang Zhang

Publisher: IEEE

Year: 2014

Geometry Effects of Asymmetrical Channel Sections on Common Defects in the Roll Forming Process

بررسی تأثیر پارامتر‌های هندسی بر عیوب در فرآیند شکل‌دهی غلتکی کانال نامتقارن

Author : yaser tajik; یاسر تاجیک; Hasan Moslemi Naeini; Roohollah Azizi Tafti; davod akbari; Mohammad Mehdi Kasaei; حسن مسلمی نایینی; روح‌اله عزیزی تفتی; داود اکبری; محمد مهدی کسائی

Publisher: Ferdowsi University of Mashhad Pressانتشارات دانشگاه فردوسی مشهد

Year: 0

Abstract:

در این مقاله ضمن تحلیل عیب‌های پیچش و انحنای طولی در فرآیند شکل‌دهی غلتکی مقاطع کانالی شکل نامتقارن، اثر پارامتر‌های هندسی مختلف روی این عیوب بررسی شده است. ابتدا مدل اجزای محدود فرآیند با قابلیت پیش‌بینی عیوب ایجاد و برای ...

Multiblock Concurrent PLS for Decentralized Monitoring of Continuous Annealing Processes

Type: Journal Paper

Author : Qiang Liu; Qin, S. Jeo; Tianyou Chai

Publisher: IEEE

Year: 2014

Compressed Bit Vectors Based on Variable-to-Fixed Encodings

Type: Conference Paper

Publisher: IEEE

Year: 2014

Coordinated switching control of thrust tracking and safety protection for aero-engines

Type: Conference Paper

Author : Chao Chen , Yanfeng Sui , Jun Zhao

Publisher: IEEE

Year: 2014

Search

Estimation of Deformation Length in Cold Roll Forming Considering the Effect of Work Hardening

نقش متغیرهای فرآیند تبلور مجدد در رفتار ناهمسانگردی ورق فولاد نورد شده St 52Role of Recrystallization Parameters on the Anisotropy Behavior of rolled Sheet Steel St 52-

QUANTITIVE XRD AND EDDY CURRENT INVESTIGATION OF ROLLED AISI 304L AUSTENITIC STAINLESS STEEL

Non-linear permutation groups on Physarum polycephalum

Antiferromagnetism and Low Magnetostriction in <inline-formula> <img src="/images/tex/21713.gif" alt="{\\rm Fe}_{100-{\\rm x}}{\\rm Mn}_{\\rm x}"> </inline-formula> (<inline-formula> <img src="/images/tex/21714.gif" alt="{\\rm x}={38}"> </inline-formula>, 42, 46, 50, and 55) Alloys

Design of a 180° directional coupler with arbitrary branch lengths

Geometry Effects of Asymmetrical Channel Sections on Common Defects in the Roll Forming Process

بررسی تأثیر پارامتر‌های هندسی بر عیوب در فرآیند شکل‌دهی غلتکی کانال نامتقارن

Multiblock Concurrent PLS for Decentralized Monitoring of Continuous Annealing Processes

Compressed Bit Vectors Based on Variable-to-Fixed Encodings

Coordinated switching control of thrust tracking and safety protection for aero-engines

Author

Publisher

Year

Keywords

Type

Language (ISO)

Content Type

Publication Title

Search

Filters

Estimation of Deformation Length in Cold Roll Forming Considering the Effect of Work Hardening

نقش متغیرهای فرآیند تبلور مجدد در رفتار ناهمسانگردی ورق فولاد نورد شده St 52Role of Recrystallization Parameters on the Anisotropy Behavior of rolled Sheet Steel St 52-

QUANTITIVE XRD AND EDDY CURRENT INVESTIGATION OF ROLLED AISI 304L AUSTENITIC STAINLESS STEEL

Non-linear permutation groups on Physarum polycephalum

Antiferromagnetism and Low Magnetostriction in <inline-formula> <img src="/images/tex/21713.gif" alt="{\\rm Fe}_{100-{\\rm x}}{\\rm Mn}_{\\rm x}"> </inline-formula> (<inline-formula> <img src="/images/tex/21714.gif" alt="{\\rm x}={38}"> </inline-formula>, 42, 46, 50, and 55) Alloys

Design of a 180&#x00B0; directional coupler with arbitrary branch lengths

Geometry Effects of Asymmetrical Channel Sections on Common Defects in the Roll Forming Process

بررسی تأثیر پارامتر‌های هندسی بر عیوب در فرآیند شکل‌دهی غلتکی کانال نامتقارن

Multiblock Concurrent PLS for Decentralized Monitoring of Continuous Annealing Processes

Compressed Bit Vectors Based on Variable-to-Fixed Encodings

Coordinated switching control of thrust tracking and safety protection for aero-engines

Design of a 180° directional coupler with arbitrary branch lengths