Search
نمایش تعداد 1-10 از 116
Effects of shear work on non-equilibrium heat transfer characteristics of rarefied gas flows through micro/nanochannels
In the current work, the effect of shear work due to the velocity slip on the non-equilibrium heat transfer in a pressure driven micro/nanochannel is evaluated under the constant wall heat flux boundary condition.As our simulation tool, the DSMC...
NUMERICAL ANALYSIS OF A NANOFLUID FORCED CONVECTION IN A POROUS CHANNEL: A NEW HEAT FLUX MODEL IN LTNE CONDITION
heat flux model is introduced for calculation of the absorbed heat flux by the solid, particle, and fluid phases. The effects of Nield number on the heat transfer are completely studied. The obtained results show that the heat flux at the wall absorbed...
Effects of Nield number on nanofluid forced convection heat transfer in porous channel: Under local thermal nonequilibrium condition
/particle/solid phases, is employed in the porous channel. Moreover, one heat flux model is proposed. The fully-developed flow and steady Darcy-Brinkman equation is employed in the porous channel. The local thermal nonequlibrium model is assumed between fluid, particles...
CuO/water nanofluid laminar convective heat transfer through square duct under uniform heat flux
and heat transfer characteristics of this fluid have been studied through square cupric duct in laminar flow under uniform heat flux. Experiments revealed that a remarkable enhancement in heat transfer coefficient is achieved compared to the base fluid...
Forced Convection Heat Transfer of Nanofluids in aChannel Filled with Porous Media Under LocalThermal Non-Equilibrium Condition with Three NewModels for Absorbed Heat Flux
. In our previous work, we introduced one model for calculating the bsorbed heat flux by solid, particle and fluid phases. In this paper, three new different heat flux models are proposed and compared together. The effect of Nield number on absorbed heat...
Study of flow boiling heat transfer characteristics of critical heat flux using carbon nanotubes and water nanofluid
with increasing mass flux and also with increasing heat flux for both pure water and nanofluids. The enhancement of the maximum heat transfer coefficient of MWCNTs-GA/water nanofluid was approximately 4.3% at CHF and 0.005 volume fraction of nanoparticles...
DSMC Simulation of Shear Driven Flow in Nano Gap Structures
.
Simulations are performed to investigate rarefaction effects on velocity, temperature, heat flux, shear stress and entropy
profiles. The specific contribution of this work is detailed discussion on heat flux and shear stress behavior of the gas...
EVALUATION OF WALL HEAT FLUX BOUNDARY CONDITION IN DSMC IMPLEMENTED IN OPENFOAM
Cooling and heating play a major role in micro/nano-devices and rarefied gases [1]. In this paper, we
report the validation of a wall heat flux boundary condition, implemented in the direct simulation
Monte Carlo (DSMC) solver...
Effects of Particle Migration on Nanofluid Forced Convection Heat Transfer in a Local Thermal Non-Equilibrium Porous Channel
with governing equations. The effects of Lewis number, Schmidt number and modified diffusivity ratio (Nbt
) on the heat transfer are completely studied. The results show that the non-dimensional heat flux absorbed by fluid is decreased when the Lewis number...