Search
CSV
RISGalvanic Corrossion of Carbon And Steel in Aggressive Environments
by epoxy bonding CFRP laminates to the critically stressed tension areas. There is, however, a concern regarding possible galvanic corrosion when carbon and steel are bonded together. This paper presents the result of a study on the galvanic corrosion...
Galvanic corrosion in gas tungsten arc welding (GTAW)304L austenitic stainless steel
galvanic corrosion between base alloy,.......
Corrosion evaluation of multi-pass welded nickel–aluminum bronze alloy in 3.5% sodium chloride solution: A restorative application of gas tungsten arc welding process
In this research, the corrosion behavior of a gas tungsten arc welded nickel–aluminum bronze (NAB) alloy
is investigated by DC and AC electrochemical techniques in 3.5% sodium chloride solution. Regarding ...
Correlation of surface Volta potential with galvanic corrosion initiation sites in solid-state welded Ti-Cu bimetal using AFM-SKPFM
This study aims to correlate the microstructure and Volta potential distribution of Ti-Cu welded bimetal to its corrosion initiation sites, using AFM-SKPFM, and SEM-EDS. Local melted zones with Ti-Cu intermetallic precipitates ...
Galvanic Corrosion Investigation of welded Nickel Aluminum Bronze Alloy in 3.5% NaCl Solution
Galvanic Corrosion Investigation of welded Nickel Aluminum Bronze Alloy in 3.5% NaCl Solution...
An approach to predict galvanic corrosion using identical couple electrodes; investigation of weld zone and parent alloy AA6XXX welded through FSW technique
The technology requies fabrication .....
Galvanic corrosion in tangstan arc welding on 17-4 PH stainless steel
Galvanic corrosion in tangstan arc welding on 17-4 PH stainless steel...
Galvanic corrosion of gas tungsten arc repair welds in 17-4 PH stainless steel in 3/5% NaCl solutionr
In this paper, the galvanic corrosion of individual components of a 17-4PH repair welded stainless
steel in 3?5% NaCl solution was investigated using various dc electrochemical measurements and
microscopy. Open circuit potential...
Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3/5%NaCl
The influence of post-weld heat treatment (PWHT), solution annealing followed by aging at 480,
550 and 620uC on the galvanic corrosion in 17-4PH stainless steel weldment in 3?5%NaCl was
studied. Potentiodynamic polarisation revealed...