به‌دلیل اینکه تاب‌کاری میان‌بحرانی یکی از مراحل عمدۀ تولید فولاد دوفازی به‌شمار می‌رود، مطالعۀ تشکیل آستنیت در این فولادها از اهمیّت زیادی برخوردار است. در این تحقیق، تأثیر میزان نورد سرد اولیّه و دمای تاب‌کاری بر تشکیل ...

The fracture behavior of two series of polyethylene (PE) films, both the unreinforced and reinforced with

different amounts of nanoscale calcium carbonate (CaCO3) particles was investigated in this research work by ...

Low-carbon steels with a ferrite-cementite microstructure represent a discontinuous yielding resulting

in several industrially undesirable problems.Considering the thermal contraction mismatch between the

ferrite ...

In this study, the influence of particles size on the work hardening of low carbon steels with composite-type microstructures has been studied. A micromechanical model has been developed to predict the isotropic and kinematic ...

به‌دلیل اینکه تاب‌کاری میان‌بحرانی یکی از مراحل عمده‌ی تولید فولاد دوفازی به‌شمار می‌رود، مطالعه‌ی تشکیل آستنیت در این فولادها از اهمیّت زیادی برخوردار است. در این تحقیق، تأثیر میزان نورد سرد اولیّه و دمای تاب‌کاری بر تشکیل ...

Since the condition of austenite phase formed during intercritical annealing treatment has a crucial impact on the final microstructure and mechanical properties of dual-phase (DP) steels, detailed investigations with ...

In the case of ductile materials such as thin plastic films, the applied stress state in front of the crack tip

is in a plane stress condition and the deformation around the crack tip is very large. Thus linear ...

The EWF approach was successfully used to characterize the fracture behavior of the medium density Polyethylene (MDPE) as well as that of the composite samples when 1, 2.5 and 5wt.% CaCO3 nanoparticles are added to MDPE. ...