In this work, the possibility of welding aluminum parts by self propagating high-temperature synthesis technique is investigated. Metallic compounds (such as sulphates and fluoride compounds) and aluminum are used as the precursor combustion powders...

In gas metal arc welding, like other welding techniques, the quality of welded joint may be described in terms of weld bead geometry and the presence of welding defects. In turn, the characteristics of welding signals, such as voltage, current...

In this study, the effect of various feed speeds on microstructure and mechanical properties of friction stir welded Cu–30Zn brass alloy is investigated. Rotation speed was fixed at 950 rpm and feed speed varied in the range of 190–375 mm...

The fact that underwater welding may be successfully carried out using standard arc welding equipment cannot be said to be very widely known. The underwater welding process has many valuable applications such as underwater ship repair, lifting...

Effect of copper content in the range of 0.14–0.94 wt.% on the microstructure and mechanical properties

of Cr–Ni–Cu low alloy steel weld metal deposits was investigated. All welds were prepared by manual

metal arc welding technique...

of more sophisticated design optimization

methodology. This paper presents a crashworthiness design of foam-filled and empty columns made

from mild steels and joined by spot-weld. The numerical analysis is carried out by Abaqus software...