Cellulose acetate (CA) is highly comparable to other synthetic polymer materials and is effective in the hemodialysis process. In this work, asymmetric CA membranes were synthesized with the phase-inversion method. CA with ...

In this study, effects of coagulation bath temperature (CBT) and polyvinylpyrrolidone (PVP K15) concentration as a pore former hydrophilic additive on morphology and performance of asymmetric polyethersulfone (PES) membranes ...

g), mono-diglyceride as an emulsifier (0, 0.3, 0.6 and 0.9 g/100 g), pH (6, 7, 8 and 9) and homogenisation pressure (0 and 6 MPa) on phases separation, viscosity, and colour of sesame milk. Quality attributes included suspension stability index...

of homogenous ECTFE solutions with the required properties for fabricating a hollow fiber membrane. The thermodynamic phase diagrams for both systems (ECTFE/DEP and ECTFE/GTA) showed a liquid–liquid (L-L) phase separation region, which is needed for a...

Using the thermal induced phase separation -TIPS- and non-solvent induced phase separation -NIPS- are the most common methods to fabricate polymeric porous membranes. Each method has own advantages and disadvantages. In NIPS method, dope solution...

Polyamide 6 hollow fiber membranes were successfully fabricated via a thermally induced phase separation (TIPS) method for the first time to the best of our knowledge. Dimethyl sulfone (DMSO2) and sulfolane were used as diluents for the TIPS method...

Abstract: Self-propagating high-temperature synthesis (SHS) was used to fabricate a Fe(Cr)–Al2O3 nanocomposite. The composite was fabricated by the reactions between the powders of Fe, Fe2O3, Cr2O3, and Al. The effect of ...

and their physical properties were analyzed by FT-IR, XRD and DSC analyses. The obtained results from FT-IR and DSC analyses indicated that the phase separation of hard and soft segments decreased and chain mobility was restricted, resulting in the increase in glass...