In present work, pitting potential and metastable pitting occurrence of the 2205 duplex stainless steel

were studied by means of statistical approaches at different annealing temperatures ranging from

1050 0C to 1250 0C. Obtained...

The influence of grain size on pitting corrosion of 304L stainless steel in 3.5 wt.% NaCl solution was investigated by electrochemical methods employing the statistical approach. The potentiodynamic results

revealed that grain refinement has...

Oxidation behaviour of surface nanocrystallized 321 austenitic stainless steel -SN–321ASS- and its conventional polycrystalline counterpart -CP–321ASS- in O2 + 10% H2O at 1000 °C was comparatively investigated. Uniform dense distribution of high...

Sensitization is a well-known phenomenon in

stainless steels which make them susceptible to

intergranular corrosion (IGC) or intergranular stress

corrosion cracking (IGSCC). Accurate measuring of the...

In this work, the effect of different tempering temperatures on the degree of sensitisation (DOS) and

pitting corrosion of AISI 403 martensitic stainless steel is studied. The specimens were annealed at

1050 .C and then tempered at 300...

In this research, the effect of solution annealing temperature on critical pitting temperature of DSS 2205

in 3.5 wt.% NaCl solution and also the pit chemistry is studied using electrochemical methods and mechanistic ...

Four different industrial filler metals were selected for the joining of AISI 304 austenitic to AISI 409 ferritic stainless steel. These fillers were austenitic and duplex stainless steels and a nickel-based alloy. The...

This paper evaluates the role ofIRdrop on initiation of the crevice corrosion of 316 L stainless steel in 3.5% NaClsolution. For this purpose, potentiodynamic and galvanostatic experiments and macroscopic/microscopic ob-servations were implemented...