Effect of various efficient vulcanization sulfur cure systems (EV) on the compression set of a nitrile rubber filled with carbon black and silica/silane fillers was examined. The cure systems had different amounts of thiuram ...

Vacuum filtration method was used to fabricate robust multiwalled carbon nanotube buckypapers (MWCNT-BPs). MWCNTs were functionalized by epoxy resin (diglycidyl ether of bisphenol A) to enhance their dispersibility. ...

. Subsequently, the compounds were crosslinked through a free radical crosslinking mechanism using dicumyl peroxide (DCP). The crosslinking took place in both, an oven and as well as under microwave irradiation in normal and under pressure conditions. The FTIR...

-propylenediene monomer rubbers (SBR and EPDM). The effects of crosslinking and foaming agents and EVA type on density and mechanical properties of the cured foams with two curing systems, peroxide and sulfur-peroxide with potential use in automotive applications...

for seal and gasket industry at elevated temperature and amine environments. These tests were essential for evaluating the durability of the gasket in a gas refinery. The FTIR spectrums revealed that the phenolic crosslink was constructed between rubber...

Nowadays recycle of thermoset polymers has attracted for reducing environmental pollution and preserving natural resources. The main purpose of this article is to investigate possible use of recycled commercial cross-linked polyethylene (XLPE) waste...

and





activator, which helped to form sulfur chemical bonds between the rubber and filler.





Different amounts of accelerator and activator were needed to fully crosslink the ...

selective scission of sulfur crosslinks

were observed, however, both longer of the reaction time and higher concentrations of the devulcanizing

agent process resulted non-selective chain scission. Mechanical properties of the devulcanized and...