Search
CSV
RISPoster abstract: Practical limits of WiFi time-of-flight echo techniques
Stability and localization of rapid shear in fluid saturated fault gouge: 1. Linearized stability analysis
Stability and localization of rapid shear in fluid saturated fault gouge: 2. Localized zone width and strength evolution
Geometry factor and redundancy effects in extrusion of rod
The present paper indicates that redundant shearing strains depend on the homogeneous strain rate and in consequnce of that, a unique equation relating redundancy to geometry factors, otherwise applicable to drawing, may not be sufficient...
Recloser and sectionalizer placement for reliability improvement using discrete event simulation
Hierarchical layout design of power SiGe HBTs
Experimental investigation of residual stress around cold-worked holes and its effect on fatigue life
Cold working a hole decreases tendency of fatigue crack near the hole to initiate or growth. It is due to creation of some compressive tangential residual stresses around the hole. In this paper, the strain recorded by strain gauges mounted around...
Performance of two 1970s and Ross 308 broiler strains fed drug-free low-protein and recommended-protein diets
The objective of this study was to compare the performance of a modern commercial broiler
strain (Ross 308; RS) with that of two 1970s broiler strains (broiler strains 1 and 2) fed a drugfree
low-protein or recommended-protein diet...
Calculation of forming limit diagrams using Hill's 1993 yield criterion
of uniaxial to equi-biaxial yield stress, strain hardening,
strain rate sensitivity and plastic anisotropy on the shape and level of forming limit curves are studied.
In addition, the capability of the JG model to predict limit strains...