In the present experimental study, the influence of primary martensitic structure on acceleration of graphitization process in hypereutectoid steels during subsequent heat treatment cycle was investigated by using of optical microscopy (OM...

Graphitization process in steels can be performing for wear resistance improvement. During this procedure cementite dissociated to free carbon (graphite) and ferrite and finally a ferritic matrix is produce-able. Although graphite gives good...

In present work, pitting potential and metastable pitting occurrence of the 2205 duplex stainless steel

were studied by means of statistical approaches at different annealing temperatures ranging from

1050 0C to 1250 0C. Obtained...

The influence of grain size on pitting corrosion of 304L stainless steel in 3.5 wt.% NaCl solution was investigated by electrochemical methods employing the statistical approach. The potentiodynamic results

revealed that grain refinement has...

Solidification of cold work tool steel ingot Type

X210Cr12 is simulated by MAGMA software. In current

study in order to produce sound ingot, a new 2.8 ton ingot

mould designed which include some changes in mould...

By calculating the accurate solution of the governing differential equation for a non-prismatic beam–column, the exact elemental stiffness matrix will be obtained. The Euler–Bernoulli beam theory is used in the ...