Preconcentration of thallium (III) by single drop micro extraction and its determination by electrothermal atomic absorption spectrometry in real samples and speciation of thallium (I) and (III)
سال
: 2011
چکیده: Abstract
Single drop micro extraction (SDME) in combination with electrothermal atomic absorption
spectrometry has been used to preconcentrate and determine thallium (III) ions followed by
speciation of thallium (I) and (III). 10.0 ml of aqueous sample of thallium containing 0.5 ml of
1% picric acid as a counter ion at pH= 6 was extracted into a 4 μl microdrop of nitrobenzene
containing dyciclohexano-18- crown-6 as complexing agent. After the extraction, the
microdrop was injected into a graphic furnace for thallium determination. Different parameters
affecting the extraction efficiency such as the type organic solvent, concentration of picric acid
and crown ether, volumes of organic and aqueous phases, pH, extraction time and temperature
were optimized. The effects of different interfering ions and methods of their eliminations were
conducted. Under the optimized conditions, thallium (III) was determined with detection limit
of 1.1 ng ml-1 and sensitivity of 0.3 ng ml-1. Relative standard deviation for five replicate
analysis of 10 ng ml-1 of thallium (III) was 4.2 percent. The calibration curve was linear in the
range of 1.1-32 ng ml-1 of thallium. The enrichment factor was calculated to be 80. Thallium (I)
and (III) speciation has been performed on the basis that thallium (III) forms a stable complex
with EDTA and would not enter into the micro drop and hence only thallium (I) can be
determined. The accuracy and validity of the method was evaluated using real samples of nail
and spiked tap water and also certified reference material.
Single drop micro extraction (SDME) in combination with electrothermal atomic absorption
spectrometry has been used to preconcentrate and determine thallium (III) ions followed by
speciation of thallium (I) and (III). 10.0 ml of aqueous sample of thallium containing 0.5 ml of
1% picric acid as a counter ion at pH= 6 was extracted into a 4 μl microdrop of nitrobenzene
containing dyciclohexano-18- crown-6 as complexing agent. After the extraction, the
microdrop was injected into a graphic furnace for thallium determination. Different parameters
affecting the extraction efficiency such as the type organic solvent, concentration of picric acid
and crown ether, volumes of organic and aqueous phases, pH, extraction time and temperature
were optimized. The effects of different interfering ions and methods of their eliminations were
conducted. Under the optimized conditions, thallium (III) was determined with detection limit
of 1.1 ng ml-1 and sensitivity of 0.3 ng ml-1. Relative standard deviation for five replicate
analysis of 10 ng ml-1 of thallium (III) was 4.2 percent. The calibration curve was linear in the
range of 1.1-32 ng ml-1 of thallium. The enrichment factor was calculated to be 80. Thallium (I)
and (III) speciation has been performed on the basis that thallium (III) forms a stable complex
with EDTA and would not enter into the micro drop and hence only thallium (I) can be
determined. The accuracy and validity of the method was evaluated using real samples of nail
and spiked tap water and also certified reference material.
کلیدواژه(گان): Keywords: thallium,single drop micro extraction,electrothermal atomic absorption
spectrometry,crown ether (Dicyclohexano–18– crown– 6),picric acid
کالکشن
:
-
آمار بازدید
Preconcentration of thallium (III) by single drop micro extraction and its determination by electrothermal atomic absorption spectrometry in real samples and speciation of thallium (I) and (III)
Show full item record
contributor author | سمیرا مهاجر | en |
contributor author | محمود چمساز | en |
contributor author | Mahmod CHamsaz | fa |
date accessioned | 2020-06-06T14:02:45Z | |
date available | 2020-06-06T14:02:45Z | |
date copyright | 9/27/2011 | |
date issued | 2011 | |
identifier uri | http://libsearch.um.ac.ir:80/fum/handle/fum/3380134 | |
description abstract | Abstract Single drop micro extraction (SDME) in combination with electrothermal atomic absorption spectrometry has been used to preconcentrate and determine thallium (III) ions followed by speciation of thallium (I) and (III). 10.0 ml of aqueous sample of thallium containing 0.5 ml of 1% picric acid as a counter ion at pH= 6 was extracted into a 4 μl microdrop of nitrobenzene containing dyciclohexano-18- crown-6 as complexing agent. After the extraction, the microdrop was injected into a graphic furnace for thallium determination. Different parameters affecting the extraction efficiency such as the type organic solvent, concentration of picric acid and crown ether, volumes of organic and aqueous phases, pH, extraction time and temperature were optimized. The effects of different interfering ions and methods of their eliminations were conducted. Under the optimized conditions, thallium (III) was determined with detection limit of 1.1 ng ml-1 and sensitivity of 0.3 ng ml-1. Relative standard deviation for five replicate analysis of 10 ng ml-1 of thallium (III) was 4.2 percent. The calibration curve was linear in the range of 1.1-32 ng ml-1 of thallium. The enrichment factor was calculated to be 80. Thallium (I) and (III) speciation has been performed on the basis that thallium (III) forms a stable complex with EDTA and would not enter into the micro drop and hence only thallium (I) can be determined. The accuracy and validity of the method was evaluated using real samples of nail and spiked tap water and also certified reference material. | en |
language | English | |
title | Preconcentration of thallium (III) by single drop micro extraction and its determination by electrothermal atomic absorption spectrometry in real samples and speciation of thallium (I) and (III) | en |
type | Conference Paper | |
contenttype | External Fulltext | |
subject keywords | Keywords: thallium | en |
subject keywords | single drop micro extraction | en |
subject keywords | electrothermal atomic absorption spectrometry | en |
subject keywords | crown ether (Dicyclohexano–18– crown– 6) | en |
subject keywords | picric acid | en |
identifier link | https://profdoc.um.ac.ir/paper-abstract-1023276.html | |
conference title | 13th International Symposium Advances in Extraction Technologies 2011 | en |
conference location | کوالالامپور | fa |
identifier articleid | 1023276 |