Search
CSV
RISDeformation Behaviour of Martensite in a Low-Carbon Dual-Phase Steel
The deformation behaviour of martensite and its effect on tensile properties of a lowcarbon
dual-phase (DP) steel were investigated. DP steel samples with different martensite contents
and morphologies were produced ...
A Low Alloy Sintered-Heat Treated Steel with Good Fatigue Properties as a suitable Material for Resisting Cyclic Stresses
In this work, attempt has been made to find a low alloy steel with adequate mechanical properties, especially fatigue limit. Two P/M Steels (Fe-Ni-Cu-Mo) with 0.6% C, one containing 1.75% and the other 4% nickel were ...
Use of Liquid Phase Sintering in Production of a new High Alloy Steel with Good wear Properties
Liquid phase sinterig is a very suitable method for producing P/M (powder metallurgy) parts with very high density near theoretical Density. This high alloy steel in the sintered-heat treated condition, is a very good ...
بررسی رفتار تغییر شکل فولاد چند فازی با آستنیت باقی‌مانده
هدف از انجام این تحقیق بررسی رفتار تغییر شکل فشاری فولاد چند فازی با آستنیت باقی‌مانده در دماهای مختلف بوده است. با انجام عملیات حرارتی مناسب بر روی فولادی کم آلیاژ با 3/0 درصد وزنی کربن، فولاد چند فازی با مقدار قابل ملاحظه ...
Effect of Martensite Plasticity on the Deformation Behavior of a Low-Carbon Dual-Phase Steel
An experimental study has been conducted to quantify the effects of martensite plasticity on the
mechanical properties of a commercial low-carbon (0.06 wt pct) dual-phase steel. The volume
fraction and ...