Search
CSV
RISThe effect of carbon nanotube dispersion on the dynamic characteristics of unidirectional hybrid composites: An experimental approach
.
Furthermore, the effects of the interfacial adhesion between the CNT/epoxy matrix and micro fibers on
the damping properties of the laminated composites are discussed using the obtained results and the
scanning electron microscopy (SEM) images....
Strain-Dependent Constitutive Modelling of AZ80 Magnesium Alloy Containing 0.5 wt% Rare Earth Elements and Evaluation of Its Validation Using Finite Element Method
In order to evaluate the hot flow behaviour of AZ80 magnesium alloy containing 0.5 wt% rare earth elements, isothermal hot compression tests were conducted at the temperatures range of 250-450 °C under the strain rates of ...
Beeswax-Colophony Blend: A Novel Green Organic Coating for Protection of Steel Drinking Water Storage Tanks
blanket reactor (UASBR) in a wastewater treatment plant was investigated using the scanning electron microscopy (SEM) technique. Regarding the consistency of experimental results, it was concluded that this proposed recyclable blend could be considered...
Effect of Magnetized water on invitro calcium carbonate solubility and eggshell breaking strength
particles, less than 0.125 mm; large particles, 2-4 mm and normal mix were tested. Magnetized water was generated by magnetizer of 0.65 Tesla magnetic fields. Scanning Electron Microscopy (SEM) was used to study the morphology of limestone crystals after...
Preparation and Characterization of Protein Nanoparticles from Human Serum
electron microscopy
(SEM) was employed whilst size distribution was measured by photon correlation
spectroscopy (PCS). It was shown that the produced nanoparticles were almost formed by a
smooth surface. Based...