Search
نمایش تعداد 1-9 از 9
Buckling of composite plates with square/triangular cutouts
Abstract – In aerospace structures, panels with variously shaped cutout are often used. The understanding of the effects of cutout on the buckling behavior of such plates has grown in importance with the increasing need ...
Stress Analysis of Composite Plates with Non-circular Cutout
an attempt is made to formulate a simple analytical method for stress analysis in perforated composite plates with non-circular cutouts. The stress concentration of isotropic and composite perforated plates with variety of centrally located non...
STRESS ANALYSIS OF COMPOSITE PLATES WITH
Panels with variously shaped cutout are often used in engineering structures. The understanding of the effects of cutout on the load bearing capacity and stress concentration of such plates is very important in designing ...
Flutter of Perforated Metallic Plates Repaired with Cross-Ply Composite Patches
parameters
on the flutter boundary of perforated plates repaired with cross-ply composite patches. Both
ply-level and sub-laminate level configurations are investigated. Presented results illustrate that
flutter boundaries of perforated...
Buckling of Perforated Plates Repaired with Composite Patches
Performance level and life span of existing structural elements can be increased by repair and strengthening of these structural elements using advanced composite materials.The performance of damaged metallic plates ...
Shear Buckling of Perforated Metallic Plates Reinforced with Square Composite Patches
The performance of damaged metallic plates reinforced with fiber-reinforced polymer composite materials (composite patches) are presented in this study. A square aluminum plate with a central circular cutout is considered ...
Flutter of perforated metallic plates reinforced with segmented piezoelectric patches
with square central cutout. Such study is important since it provides the necessary design information for flutter behavior of repaired perforated plates. Particular emphasis is placed on the flutter analysis of a square aluminum plate. Four different...
Flutter of Perforated Metallic Plates Repaired with Angle-ply Composite Patches
The performance of damaged metallic plates reinforced with fiber-reinforced polymer
composite materials (composite patches) is presented in this study. A square aluminum plate with a
central cutout is considered ...
Comparison between Two Different Pluviation Setups of Sand Specimens
with a perforated plate and the second is a portable curtain rainer system. The portable curtain rainer system essentially consisting of a sand storage, flexible hose, a hopper, rigid tubes, and curtain with different opening widths. This study aims...