Search
CSV
RIS65 nm CMOS switching discontinuous conduction mode buck converter with 330 ns start-up time for light-load power-cycled applications
Aggressive power cycling of DC-DC converters is becoming important in many applications ranging from sensor interfaces to wireless transceivers, where the system needs to be on for only short time intervals. In this study, ...
Evaluation of current stresses in nine-switch energy conversion systems
Single-phase direct AC–AC step-down converter
Novel grid voltage estimation by means of the Newton–Raphson optimisation for three-phase grid connected voltage source converters
This study presents a proportional resonant current control scheme for three-phase grid connected voltage source converters without any grid voltage sensors. Towards this goal, the grid voltage sensors are replaced by a ...
Digital neutron-gamma discrimination with scintillators: An innovative approach
In this paper, a digital neutron–gamma discrimination (DNGD) method with an NE213 scintillator has been proposed in which the anode pulse is divided into two different pulses, one representing the amplitude and the other ...
Identification of continuous-time switched linear systems from low-rate sampled data
This study is about the identification problem of continuous-time switched linear systems from low-rate sampled data. The main problem in the identification of such systems, when the sampling rate is low, is that the ...