Search
CSV
RISEffect of both nano-size alumina particles and severe deformation on polyethylene crystallinity index
The morphological and microstructural changes during ball milling of PE powder mixed
with different weight percent (5–15 wt%) of Alumina particles (50–100 nm) were studied.
The milling was performed in a planetary ball mill for various...
Manufacturing of Al-Al2O3-Mg multilayered nanocomposite by ARB process and study of its microstructure, tensile and bending properties
of Al2O3 particle addition and to create better adhesion at interfaces, Al and different percentages of Al2O3powders were ball milled and Al/Al2O3 composite powders were produced. Afterward, the composite powder was added between Al and Mg sheets...
Effect of alumina particles on structural changes in MoS 2 during a ball milling process
is exfoliation of bulk molybdenite using a ball milling technique. In this research, the morphological evolution of molybdenite in the milling process of MoS2 and MoS2–Al2O3 systems is studied. Structural changes in molybdenite were investigated using...
Effect of Cu 2+ ion on biological performance of nanostructured uorapatite doped with copper
Nanostructured copper-doped fluorapatite (Cux.Ca(10-x).(PO4)6.F2) having crystallite sizes of 19, 29 and 34 nm at x = 0.9, 0.4 and 0.0, respectively, was synthesized by planetary ball milling of CaO, P2O5, CaF2 and CuO powders. Specifications...
Crystallinty behavior of MDPE-clay nanocomposites fabricated using ball milling method
The high energy ball milling technique has emerged as a non-expensive route to produce nonequilibrium phases in several varied forms such as nanostructured, amorphous materials, nanocomposites, and extended solid solutions. It has .......
Thermal and kinetic investigation of ball milled MDPE
Thermal and kinetic investigation of ball milled MDPE...
Modeling nonuniform irradiance and chromatic aberration effects in a four junction solar cell using SPICE
Effect of Milling Time and Clay Content on the Thermal Stability of Polyethylene-clay Nanocomposite
The aim of the paper was to investigate the thermal properties of polyethylene (PE)-clay nanocomposites prepared via the high energy ball milling (HEBM) method. The structure and morphology of the nanocomposites were examined by transmission...
An investigation on the mechanism and reaction sequence of scheelite-magnesium mixtures during mechanical milling
The mechanism of mechanically-induced self-propagating reaction (MSR) of scheelite with magnesium during reactive ball milling was investigated using in-situ monitoring of the vial temperature, X-ray diffraction analysis and field emission scanning...
On the role of nano-size SiC on lattice strain and grain size of Al/SiC nanocomposite
In the present study high energy ball mill was implemented to produce aluminum (Al) matrix composite
powders reinforced with silicon carbide (SiC). To clarify the role of particle size of SiC on lattice
strain and grain size of Al two...