This paper deals with analytical solution of piezoelectric laminated composite plates with arbitrary lamination and boundary conditions subjected to electromechanical loadings. A new first-order shear deformation plate ...

In this paper the effect of different hardening models in simulating the U-bending process for AA5754-O and DP-Steel, taking a benchmark of NUMISHEET93 2-D draw bending, has been discussed. The hardening models considered in simulations are...

, the Bauschinger effect must be considered to determine accurately the internal stress dis-tribution within the sheet metal after de-formation. In this paper the influence of Bauschinger effect on springback in reverse bending process is investigated numeri...

One of the most widely used sheet metal forming process is bending when a planer sheet is plastically deformed to a curved one. This process is widely employed in automobile industry, construction of large spherical and cylindrical pressure vessels...

The full LWT of Reddy [1] is used to analyze the bending problem of Antisymmetric cross-ply thick laminates with finite dimensions. The solution procedure is based on a generalized Lévy-type solution [2] where two opposite edges of the plates...

to a bending moment in addition to shear, the determination of the ultimate resistance becomes more complex. Herein, an interaction formula for the ultimate resistance of slender plate girders to combined bending and shear loading is proposed that shows...

C is suitable temperature for accumulative roll bonding of Al and Mg sheets with nano Al2O3 particles. ARBed composite with Al/5wt.% Al2O3 composite powder showed higher tensile strength while the maximum bending strength was related to the composite containing...

, 400 and 450 °C), and also two different time (1 and 10 minutes) for austempering heat treatment. After heat treatment process, the microstructure of samples has been studied by optical microscope. Hardness and three-point bending test indicates...

In the current paper, analytical solutions are presented

for the nonlinear problem of electrostatically actuated

torsional micromirrors considering the bending of the

torsional beams. Energy method is used for finding the...

of this paper is to moot an appropriate nonlinear dynamic model

for the fast trilayer bending actuators by taking advantage of the previously proposed distributed

RC circuit for modeling electrical admittance for polypyrrole (PPy) polymers. The...